Quick answer
On Electrolux / AEG washing machines, error code E40 means: Door not closed or not locked. Usually yes. Fix the simple cause below and restart the programme.
Can I keep using the machine?
Severity: Low
Usually yes. Fix the simple cause below and restart the programme.
Common causes
- Laundry caught in the door or door seal
- Damaged door latch or door lock
- Damaged wiring or a loose/corroded connector
How to fix it
- Open and firmly close the door, removing anything caught in the seal
- Unplug the machine for a few minutes, then switch it back on (reset)
- If the code keeps coming back, contact an authorised service technician
Frequently asked questions
What does Electrolux / AEG error E40 mean?
On Electrolux / AEG washing machines, error code E40 means: Door not closed or not locked.
How do I fix Electrolux / AEG error E40?
Start with these steps: Open and firmly close the door, removing anything caught in the seal; Unplug the machine for a few minutes, then switch it back on (reset); If the code keeps coming back, contact an authorised service technician.
Can I keep using the washing machine with error E40?
Severity: Low. Usually yes. Fix the simple cause below and restart the programme.
Electrolux / AEG washing machine error codes
E10Water not filling (water supply problem)E20Water not drainingE30Water level (pressure) sensor faultE50Motor faultE60Heating fault, water not heatingEF0Water leak detected in the baseEH0Power supply voltage out of range